SD card clock edge problems?

There’s something still not right with our SD card initialisation routines.We’ve suspected for a while that there’s something going on with the clock edge for reading/writing responses to/from the SD card. Our logic probe appears to be displaying...

SD card send/receive still not quite there

After breathing a massive sign of relief once the SD card starting responding to SPI commands, we thought it’d be relatively straight forward to get data into and out of the card. We’ve already worked with NAND flash memory (in our case AT45DB041D eeprom...

SD Card SPI timing graphs

This whole SD-card-access-via-SPI is proving to be a bit of a headache.Just to make sure we’re not having a timing issue (cards need to be interfaced at < 400khz until properly initialised) we’ve even resorted to bit-banging the SPI and introducing...

Sourceboost SD Card reader

We’re having a bit of a time of it at the minute, just trying to get our PIC16F1825 to correctly initialise an SD card. It’s not helped by the fact that we’re using a new chip we’ve never used before, in a language/syntax we’ve not used...
Bitnami